Diffractive proteon fragmentation in 16, 32, and 110 GeV/cK − p interactions and the diffractive production of heavy quarks(s\bar s,c\bar c)

The inclusive proton diffraction dissociation cross sections in 16, 32, and 110 GeV/cK ^? p interactions are determined from the spike nearx=1 in the inclusive negative particle spectra and are compared to those obtained inK?p interactions using other selection methods at various energies. The same procedure is applied to events containing aV ⁰ in order to obtain the cross section for diffractive \(s\bar s\) production. While the total cross section for proton diffraction is found to be approximately constant in the energy range studied here, proton diffraction yielding an \(s\bar s - pair\) is found to increase significantly. In particular it is almost constant at 85 μb forΛ ⁰ and Σ production but for \(NK\bar K\) it rises from zero at 16 GeV.c to about 200 μb at 110 GeV/c. From the result for \(s\bar s\) diffractive production an estimate for the \(c\bar c\) diffractive production cross section of approximately 1–10 μb at 110 GeV/c is obtained.     

First access to the spin-labelled β-amino acid POAC in an enantiopure state by resolution through its binaphthyl esters

Resolution of trans 3-(9-fluorenylmethyloxycarbonylamino)-1-oxyl-2,2,5,5-tetramethylpyrrolidine-4-carboxylic acid (Fmoc-POAC-OH) was quickly achieved upon esterification with (aR)-1,1′-binaphthyl-2,2′-diol, chromatographic separation of the obtained diastereomers, and facile saponification of the aryl ester function with removal of the chiral auxiliary.     

Amine-terminated dendrimers as biomimetic templates for silica nanosphere formation

In diatoms, silica synthesis occurs by use of complex posttranslationally modified peptides, termed silaffins, and highly complex biological polyamine structures. Silaffin peptides have lysine residues that are modified to long-chain polyamine moieties of N-methyl derivatives of polypropylenimine to drive silica synthesis at slightly acidic pH conditions. Using polypropylenimine (PPI) and PAMAM amine-terminated dendrimers as a biomimetic analogue of the polyamine modifications of silaffins, we have demonstrated the condensation of silica nanospheres. We have shown that the dendrimers react in an amine concentration-dependent fashion yielding silica nanospheres with a distinct size distribution reminiscent of the structures produced from both the modified and nonmodified peptides extracted from diatoms. Additionally, the templates were encapsulated by the growing nanospheres and precipitated from solution in a manner similar to that previously described for the bioactive peptides and polyamines.     

α,β-unsaturated oximes : Isoxazoline formation by thermal cyclisation of compounds related to benzalacetophenone oxime and isoxazoline thermal cycloreversion reactions

At about 300° the title compounds yield fragments attributed to cyclisation to isoxazolines and subsequent cycloreversion. Isoxazolines are formed at about 200° and can usually be isolated. At 300° they yield the same products as the oximes.Thus benzalacetophenone oxime gives 3,5-diphenylisoxazoline which then largely undergoes two distinct cycloreversions: (a) 1,3-cleavage (numbers refer to isoxazoline bonds) yielding benzonitrile and acetophenone and (b) reductive 1,4-cleavage yielding benzaldehyde and 1-phenylethylimine hydrolysis products. By-products are 2,4,6-triphenylpyridine, water and ammonium benzoate. With α-methylchalcone oxime reductive 1,4-cleavage is suppressed and with β-methylchalcone oxime both modes of cleavage are suppressed and 5-methyl-3,5-diphenylisoxazole is the stable product. An analogue of α-methylchalcone oxime, 2-methyl-1-phenyl-3-(2-thienyl)prop-2-ene-1-one oxime gives fragments attributed to both cleavage modes of an unisolatable and hitherto unknown isoxazoline.Possible mechanisms for the cyclisation and cycloreversions are discussed and the reductive 1,4-cleavage is believed to be a cycloreversion of a vinyl-nitrene.     

In-lens cryo-high resolution scanning electron microscopy: methodologies for molecular imaging of self-assembled organic hydrogels.

The micro- and nanoarchitectures of water-swollen hydrogels were routinely analyzed in three dimensions at very high resolution by two cryopreparation methods that provide stable low-temperature specimens for in-lens high magnification recordings. Gemini surfactants (gS), poly-N-isopropylacrylamides (p-NIP Am), and elastin-mimetic di- (db-E) and triblock (tb-E) copolymer proteins that form hydrogels have been routinely analyzed to the sub-10-nm level in a single day. After they were quench or high pressure frozen, samples in bulk planchets were subsequently chromium coated and observed at low temperature in an in-lens field emission SEM. Pre-equilibrated planchets (4-40 degrees C) that hold 5-10 microl of hydrogel facilitate dynamic morphological studies above and below their transition temperatures. Rapidly frozen samples were fractured under liquid nitrogen, low-temperature metal coated, and observed in-lens to assess the dispersion characteristics of micelles and fragile colloidal assemblies within bulk frozen water. Utilizing the same planchet freezing system, the cryoetch-HRSEM technique removed bulk frozen water from the hydrogel matrix by low-temperature, high-vacuum sublimation. The remaining frozen solid-state sample faithfully represented the hydrogel matrix. Cryo- and cryoetch-HRSEM provided vast vistas of hydrogels at low and intermediate magnifications whereas high magnification recordings and anaglyphs (stereo images) provided a three-dimensional prospective and measurements on a molecular level.     

Trends in 19F-19F and 29Si-19F coupling constants in organosilicon derivatives containing SiF2 and Si2F4 units

Consideration of ¹⁹F-¹⁹F and ²⁹Si-¹⁹F coupling constants in a series of organosilicon derivatives containing SiF₂ and Si₂F₄ units reveals a number of trends which are useful for structural and stereochemical assignments. For example the vicinal ¹⁹F-¹⁹F coupling constants in a number of CSiF₂SiF₂C- derivatives (including straight chain compounds, disilacyclobutanes and disilacyclohexanes) show an apparent linear dependence on dihedral angle, varying in magnitude from near zero for small values of φ up to ca. 19 Hz for φ ～ 180°. This is particularly useful for stereochemical assignments [1,2]. In addition ²⁹Si-¹⁹F coupling constants appear to fall in quite distinct ranges (¹J_SiF > 300 Hz, 29 Hz < ²J_SiF < 55 Hz, ³J_SiF < 10 Hz). This is quite useful for structural assignments [1,6]. Reaction of SiF₂ with 1,3-cyclohexadiene gives two new silicon fluorine compounds: a disilabicyclo[2,2,2]octene and an HSi₂F₅-substituted cyclohexadiene.     

Determination of triphenyltin hydroxide derivatives by capillary GC and tin-selective FPD

A new method for the determination of triphenyltin hydroxide using capillary column gas chromatography with a tin-selective flame photometric detector has been developed. Triphenyltin hydroxide and its potential metabolites are converted to methyl derivatives and separated on glass capillary columns coated with OV-101. Derivatization of triphenyltin hydroxide, triphenyltin chloride, diphenyltin dichloride, phenyltin trichloride, and bis-triphenyltin oxide is nearly quantitative with a minimum of redistribution products. The selectivity of the flame photometric detector is cearly demonstrated by the comparison of chromatographic profiles obtained from using both the flame photometric and flame ionization detectors. The use of this chromatographic system in the analysis of triphenyltin hydroxide in a fortified water sample demonstrates the potential use of this system in organotin residue chemistry.     

The Crystal Structure of Ba3Cu2Al2F16: a Relative of Ba4Cu2Al3F21

Ba₃Cu₂Al₂F₁₆ is monoclinic: a = 7.334(1)Å, b = 5.320(2)Å, c = 16.022(1)Å, β = 96.34(1)°, Z = 2. Its crystal structure was solved in the space group P2₁ (No. 4) from synchrotron X‐ray single crystal data using 2685 unique reflections (2639 with F_o/σ(F_o) > 4). The final R factor is 0.044. The structure consists of a succession along the c‐axis of the cell of three layers of two different kinds of sheets developing in the (a, b) plane. The first one, formulated [(AlF₅)₂]_∞^4— and hereafter named A, is built up from infinite cis‐chains of aluminium‐fluorine octahedra [AlF₆], linked by two vertices and distanced by a. The second one, formulated [Cu₂AlF₁₁]_∞^4— and named B, is bidimensional. It is constituted of distorted copper‐fluorine octahedra [CuF₆], linked by edges, which form infinite chains interconnected by three vertices of isolated [AlF₆] octahedra. The stacking sequence of the sheets is (A, B, B)_∞. The barium ions, 12‐coordinated, are inserted between the sheets. The crystal structure of Ba₃Cu₂Al₂F₁₆ is closely related to that of Ba₄Cu₂Al₃F₂₁. Only the proportion and the stacking sequence of the two kinds of sheets in the c‐direction differ, according to two different compositions and two different symmetries.